Flashlights at Vista ProductionFenix L2t
Fenix LD20 205 Lumen LED FlashlightThe Fenix LD20 LED flashlight is digitally regulated and digitally controlled. It has two output modes which produce a total of six levels of output. These modes not only allow the user to select the best compromise between brightness and runtime for any given task, but they also help to aid in an emergency. The LD20 does all this and still retains a very compact size and uses a commonly found AA battery. If you're looking for solid reliability, digitally-regulated brightness, and compact size, this Fenix is for you. ◎ Cree XP-G LED (R4) with lifespan of 50,000 hours ◎ Two modes (6 types) of output, generation/turbo selected by turning the bezel (patented) - General Mode: 9 lumens (71hrs) -> 50 lumens (13hrs) 105 lumens (5hrs) -> SOS ◎ Turbo Mode: 205 lumens (2hrs) -> Strobe ◎ Max beam length：135 meters ◎ Digitally regulated output - maintains constant brightness ◎ Uses two 1.5V AA ( Alkaline, Ni-MH, Lithium ) batteries, inexpensive and widely available ◎ 150mm (Length) x 21.5mm (Diameter) ◎ Made of durable aircraft-grade aluminum ◎ Premium Type III hard-anodized anti-abrasive finish ◎ 60-gram weight (excluding batteries) ◎ Waterproof to IPX-8 Standard ◎ Toughened ultra-clear glass lens with anti-reflective coating ◎ Push-button tail cap switch ◎ Capable of standing up securely on a flat surface to serve as a candle ◎ Anti-roll, slip-resistant body design ◎ Included accessories: holster, lanyard, body clip, two spare o-rings, and a rubber switch boot. Lightweight 3-ounce, 6-inch body made of durable aircraft-grade aluminum; Type III hard-anodized anti-abrasive finish; waterproof to IPX-8 Standard. Virtually indestructible, microprocessor-controlled, CREE light emitting diode (LED) has no filament to burn out or break. Reaches up to 135 meters; runs on two 1.5-Volt AA ( Alkaline, Ni-MH) batteries (batteries sold separately). Digitally regulated and controlled 205 lumen LED Flashlight offers two output modes for a total of 6 output levels.
Fenix E20 High Performance Adjustable Cree LED Flashlight3.3-hour runtime using two 1.5V AA ( Alkaline, Ni-MH) batteries, inexpensive and widely available--NOT INCLUDED. 3 ounce slip-resistant body design is made of durable aircraft-grade aluminum, Type III hard-anodized anti-abrasive finish. Focus adjustable flashlight for regulation of focus (pinpoint) and flood (widespread) light that throws beam over 100 meters (330 feet). Virtually indestructible, microprocessor-controlled, CREE light emitting diode (LED) has no filament to burn out or break. Waterproof to IPX-8 Standard.
Fenix L2T 2 Level High Performance Cree LED FlashlightUnbelievable 3 ounce body design is made of durable aircraft-grade aluminum, Type III hard-anodized anti-abrasive finish. Waterproof to IPX-8 Standard. Virtually indestructible, microprocessor-controlled, CREE light emitting diode (LED) has no filament to burn out or break. Will reach over 115 meters (377 FT) using just two 1.5V AA ( Alkaline, Ni-MH) batteries, inexpensive and widely available--NOT INCLUDED.
Fenix TK40 High Performance Cree LED Flashlight, Maximum 630 LumensTK40 is the first four-core LED flashlight of Fenix, which provide high brightness and long-throwing beam. CREE MC-E four-core LED, max output reaches 630 Lumens, which makes it the world’s brightest AA flashlight. Optimized circuit with large reflector throw 300m (984ft) long lighting beam. Intelligent memory circuitry memorizes last primary output when activating the light. The TK40 produces great power with standard AA batteries. The battery is inexpensive and widely available. This light is suitable for outdoor hunting, exploring, search and rescue, and all other extreme adventures in your life. • Cree MC-E LED with lifespan of 50,000 hours • Optimized circuit with large reflector throw 300m long lighting beam• Intelligent memory circuitry memorizes last primary output when activating the light• Two modes of 8 type output: 4-type of primary output: Turbo Mode: 630 lumens (2hrs)-> Low: 13 lumens (130hrs) -> Mid: 93 lumens (20hrs) -> High:277 lumens (6.8hrs) 4-type Strobe mode: Strobe->Slow Flash->SOS->Fast Flash• Uses eight 1.5V AA batteries (Alkaline, Ni-MH) 4 AA batteries is available for emergency)• Reflector with high efficiency and focus for far throw and wide lighting range• Constant brightness with efficient circuitry and reverse polarity battery protection• Digitally regulated output - maintains constant brightness• Low power Indication with over discharge protection • Durable Type III hard-anodized anti-abrasive finish• Push-button tailcap switch• Made of T-6 grade aircraft aluminum• Type III hard-anodized finish• Waterproof to IPX-8 Standard• Toughened ultra-clear glass lens with anti-reflective coating• Capable of standing up securely on a flat surface to serve as a candle• Included accessories: shoulder strap, lanyard, rubber switch boot and two spare o-rings.. Cree MC-E LED2 modes with 8 types of output -4 types of primary output: Turbo (630 Lumens, 2Hrs), Low (13 Lumens, 150Hrs), Mid (93 Lumens, 20Hrs), High (277 Lumens, 6.8Hrs) -4 types of strobe: Strobe, Slow flash, SOS, Fast flash. Uses eight 1.5V AA batteries (not included) and maintains excellent constant brightness with two output modes: 8 output types,including Turbo output which can be used whenever high-powered light is needed, exploration, search & rescue, long-range ID.
Fenix E21 FlashlightThe E21 is a two stage light made with simple operation in mind. By the easy twist of the head, the owner can go from a long runtime 48 lumen beam to a long reaching 150 lumen beam. Add the fact that it runs off of affordable and easy to find AA batteries and this could be the perfect light for all adventures, where ever you may be. Product Features: * Cree XP-E LED with lifespan 50,000 hrs * Uses two 2 AA (Alkaline, Ni-MH) batteries * Max Brightness: 150 lumens * Low Bright: 48 lumens * 6.5" (Length) x 1" (Diameter) * Weight: 3oz * Output: 2 types * Patented physical structure avoid circuit damaging from reverse connection of battery * Tactical push-button tail cap switch * Toughened ultra-clear double glass lens with anti-reflective coating * Waterproof to IPX-8 Standard. Tactical push button tail cap switch provides momentary operation when pushed half way. Powered by 2 AA batteries; easy to find and affordable (Not Included). Body Size: 6.5" (Length) x 1" (Diameter); 3 ounces; Waterproof to IPX-8 Standard. LED outputs 150 lumens (2.15 hrs runtime) on high and 48 lumens (11 hrs runtime) on low are selected by simple twist of the lights head.
More Fenix L2t
Fenix Red Filter Adapter Flashlight Accessory FFILTRFenix Red Filter Adapter Flashlight Accessory FFILTR. The Fenix Red Filter Adapter FFILT-R is a flashlight accessory for AA and CR123 flashlights from Fenix. This Fenix Flashlight Accessory attaches to you Fenix flashlight to provide a penetrable red light. The Red Filter Adapter is great to have in times where seeing in the dark is required by preserving your natural night vision. Features of Fenix Red Filter Adapter F.FILT-R: Attaches to Fenix flashlights to give off a penetrable red light Made with a toughened ultra clear glass lens with AR coating and high temperature resistance The filter seat uses the material PC 2805 Compatible with AA and CR123 Fenix flashlights Will only work with PD30 PD20 LD20 LD10 P3D P2D L1D L2D P1D L1T/L2Tv2.0 flashlights Will NOT work with first version L1T/L2T or the PD10+ or PD20+ Package Contents: Fenix Red Filter Adapter FFILTR$5.5
Fenix AD401 Light DiffuserThe AD401 diffuser attaches to the front of many Fenix lights, allowing you to create a flood beam. The diffuser can be flipped up or down to quickly switch between spot and flood. Compatible lights: HP10, LD10, LD20, PD20, PD30, L1D, L2D, L1T, L2T, P2D, P3D$5
Fenix Storage CapThis cap attached to a Fenix flashlight body to turn it into a waterproof battery storage capsule. Compatible with the following bodies: L1D L2D L1T V2 L2T V2 P2D P3D$2
Fenix L2T V2.0 Cree LED Flashlight"Fenix L2T V2 Cree XR-E LED Flashlight - 2xAA, Tactical Switch"$39.95
Fenix Flashlight Traffic Wand Tip Diffuser TK / TA (6" x 1") AD201O6" Traffic Wand Tip. For use with Fenix flashlights to create a glowing orange high visibility wand. Features quick attachment and removal of tip. Made out of the impact resistant material PC 2805, which has high temperature resistance and good heat stability. Measures approx. 6" x 1". PLEASE NOTE: This diffuser tip will work with the following lights in the Fenix series: PD30, LD20, LD10, P2D. It will not work with first version L1T/L2T or the PD10+ or PD20+$4.9
Fenix AD401 'Headlight' Diffuser Lensthe fenix diffuser lens is specially designed for fenix headlamps and flashlights to diffuse the light beam. easily fitted, it can be used for reading or as a camping light. utilizes transparent pc material of high quality without changing the light color simple structure with easy fitting, the diffuser can be securely fitted to your flashlight/headlamp easy adjustment between focused beam and flood beam with hinged clamshell design for convenient and ergonomic use. with its slotted ring mount, fenix diffuser lens fits headlamp or flashlight with 20mm-21.5 bezels, such as hp10,ld10,ld20,pd20,pd30,l1d,l2d,l1t,l2t,p2d,p3d$5
Fenix L2T Body ONLY, blackFenix L2T body. Converts Fenix L1T to L2T powered by 2 ea AA batteries. Batteries NOT included.$19.5
Fenix Battery Storage Cap Flashlight Accessory FCAPFenix Battery Storage Cap Flashlight Accessory FCAP. We are an Authorized US Distributor for Fenix Flashlight Accessories. The Battery Storage Cap by Fenix will turn your spare Fenix flashlight body into waterproof battery storage. For more flashlight accessories from Fenix please visit our Fenix Flashlight Accessories page. Features of Fenix Battery Storage Cap F.CAP: Attachable cap Compatible with L1D L2D L1T V2 L2T V2 P2D P3D flashlights Makes spare flashlight body into waterproof battery storage Package Contents: Fenix Battery Storage Cap F-CAP$5.99
Clear Diffuser Lens 4 Fenix Flashlights L1t L2t L1dFENIX LIGHT DIFFUSER LENS AD401 GREAT FOR DIFFUSING THE LIGHT WHILE READING! DESCRIPTION: HIGH QUALITY TRANSPARENT PC MATERIAL WILL NOT CHANGE THE LIGHT COLOR SECURELY FITS TO A FLASHLIGHT OR HEADLAMP CLAM SHELL HINGED DESIGN TO MOVE QUICKLY BETWEEN BEAMS FITS MOST 20mm to 2.5mm BEZELS FITS MOST FENIX FLASHLIGHT HEADLAMP MODELS HP10, LD10, LD20, PD20, PD30, L1D, L2D, L1T, L2T, P2D, P3D$5.07
Fenix Flashlight Red Filter Adaptor Cap Signal AD301-RThis is a filter which attaches to Fenix flashlights to give off penetrable red light.Made with a toughened ultra clear glass lens with AR coating and high temperature resistance.The filter seat uses the material PC 2805Compatible with AA and CR123 Fenix flashlightsThis filter will work with the following lights:P3D, P2D, L1D, L2D, P1D, L1T/L2Tv2.0 (It will not work with first version L1T/L2T)Size: 18(H)*27(H) mm$5
Fenix L1T Body ONLY, blackFenix L1T body. Converts Fenix L2T to L1T powered by a single AA battery. Battery NOT included.$18.5
Fenix Flashlight Tip Diffuser TK / TA (6" x 1") AD201O6" Traffic Wand Tip. For use with Fenix flashlights to create a glowing orange high visibility wand. Features quick attachment and removal of tip. Made out of the impact resistant material PC 2805, which has high temperature resistance and good heat stability. Measures approx. 6" x 1". PLEASE NOTE: This diffuser tip will work with the following lights in the Fenix series: PD30, LD20, LD10, P2D. It will not work with first version L1T/L2T or the PD10+ or PD20+$6.99
Fenix Pd/ld Series Red FilterMALLARD SPRING AUTHORIZED FENIX FLASHLIGHT DISTRIBUTOR Contact us with any questions sales@mallardspring.com Fenix PD/LD Series Red Filter Construction: Durable ultra clear AR coated glass lens with high temperature resistance. PC 2805 Material Filter Seat Compatible with these Fenix models: All new PDxx LDxx, PxD, LxD, L1T/L2T v2.0 only. Great accessory!! Preserve your night vision! We Process Fenix Warranty Claims for any Fenix item purchased from us. (claims processed in MA, USA) ***Use E$4
Fenix Filter Adapter - RedThis is a filter which attaches to Fenix flashlights to give off penetrable red light.Made with a toughened ultra clear glass lens with AR coating and high temperature resistance The filter seat uses the material PC 2805 Compatible with AA and cr123 Fenix flashlights PLEASE NOTE: This filter adapter will only work with the following lights in the Fenix Digital series:PD30, PD20, LD20, LD10, P3D, P2D, L1D, L2D, P1D, L1T/L2Tv2.0It will not work with first version L1T/L2T or the PD10+ or PD20+$3.99
Fenix White Diffuser Tip Flashlight Accessory FDIFFWFenix White Diffuser Tip Flashlight Accessory FDIFFW. The Fenix Diffuser Tips attach onto Fenix Flashlights to create a softer light to use while reading in low light areas. Compatible with AA batteries and CR123A batteries these Fenix Flashlight Diffuser Tips can also be used for a camping light or signal lamp. This flashlight accessory can be easily attached and removed. These Fenix Flashlight Accessory uses bullet proof plastic technology created by Bayer Material Science AG which makes it impact and heat resistant. For more flashlight accessories from Fenix please visit our Fenix Flashlight Accessories page. The following options are available: FDIFFR: Fenix Red Diffuser Tip FDIFFW: Fenix White Diffuser Tip Features of Fenix Diffuser Tips: Creates a softer light for use while reading in dark areas Can also be used as a camping light or signal lamp Made out of the impact resistant material PC 2805 High temperature resistance with good heat stability Easy to attach easy to remove Compatible with PD30 PD20 LD20 LD10 P3D P2D L1D L2D P1D L1T/L2Tv2.0 flashlights only Will not work with first version L1T/L2T or the PD10+ or PD20+ Package Contents: Fenix Flashlight Diffuser Tip$6.99
Fenix Accessory Kit - Includes Traffic Wand, Diffuser Tip, Filter Adapter, and Diffuser LensWant to give someone a gift? Why not give an excellent gift? The Fenix Excellent Gift kit offers four great accessories for the Fenix LD and PD series lights. The kit includes a traffic wand, diffuser tip, filter adapter, and diffuser lens... everything you could possibly need! Traffic Wand The Fenix Traffic Wand can convert your flashlight into a glowing orange high visibility wand. It's the best option for emergency situations and traffic control. Made from PC 2805 plastic covered by Bayer Material Science AG high quality guarantee Anti-impact and anti-heat, super durable, can be used in bullet-proof applications Easy to attach, easy to remove Length: 180mm, Diameter of Head: 39.5mm Compatible with flashlight with 34mm diameter, like TK10, TK11, TK12, TA20, TA21 Diffuser Lens The Fenix Diffuser Lens is specially designed for Fenix headlamps and flashlights to diffuse the light beam. Easily fitted, it can be used for reading or as a camping light. Utilizes transparent PC material of high quality without changing the light color Simple structure with easy fitting, the diffuser can be securely fitted to your flashlight/ headlamp. Easy adjustment between focused beam and flood beam with hinged clamshell design for convenient and ergonomic use. With its slotted ring mount, Fenix Diffuser Lens fits headlamp or flashlights with 20mm-21.5mm bezels, such as HP10, LD10, LD20, PD20, PD30, L1d, L2D, L1T, L2T. P2D, P3D Diffuser Tip The Fenix Diffuser Tip easily attaches to most Fenix flashlights to diffuse and soften the light. It works great as reading light, camping light, and an emergency signal light. It is made from quality PC 2805 plastic created by Bayer Material Science AG. The PC 2805 is very durable, is impact and heat resistant, and is used in bullet-proof applications. Its intuitive design makes it easy to use- just attach the diffuser to the flashlight head and turn on the light! Filter Adapter The Filter Adapter easily attaches to most Fenix flashlights to filter through red light. The red light works great for emergency and relief signals, and it easily penetrates fog and smoke. It uses a toughened ultra-clear glass lens with anti-reflective coating that provides heat resistance and maximum light penetrability. It's made from quality PC 2805 plastic created by Bayer Material Science AG. The PC 2805 is very durable, is impact and heat resistant, and is used in bullet-proof applications.$9.95
Fenix Diffuser Lens AD401Fenix Diffuser Lens, part # AD401. Fits the following Fenix lights: • Fenix HP10 LED headlamp • Fenix LD10 and LD20 LED flashlights • Fenix PD20 and PD30 LED flashlights • Fenix P2D and P3D LED flashlights • Fenix L1D and L2D LED flashlights • Fenix L1T and L2T LED flashlights$2
Fenix L2t 2 Level High Performance Cree Led FlashlightPowered by Frooition Pro Shop Search Fenix L2T 2 Level High Performance Cree LED Flashlight Click here to view full size. Full Size Image Click to close full size. Item Description The Fenix L2T V2.0 has a simple yet effective interface with efficient emitter for a brighter, more intense beam. Also uses a textured reflector, eliminating artifacts and dark spots some smooth reflectors can create. The L2T V2.0 has the convenient ability to select between high and low beam with a simple twist of t$43.88
Fenix L2t V2 Led Aa Flashlight/torch 152 Lumen BlackStore Categories Camping Gear Flashlight Accessories Flashlights Kids' Gear Knives Micro Lights Multi-Tools Outdoor Fun Swiss Army Knives Water Bottles Waterproof Cases MAKE AN OFFER! The "Best Offer" feature will provide an automatic response - Complete your transaction in seconds without having to wait for a response from us. Fenix L2T v2.0 Cree LED Flashlight -BLACK BRAND NEW - IN UNOPENED RETAIL PACKAGING L2T v2.0 Features: Utilizes a Cree 7090 XR-E LED with a life of 50000 hours Two level$48.38
Ultra Powerful Fenix L2T Q2 152Lumens LED Flashlight (Black)You will not regret to buy this high performance Fenix L2T Q2 152lumens LED flashlight, which is the best selection for lighting use in the dark outside. The flashlight is made of durable aircraft-grade aluminum and comes with amazing 152lumens.$50.82
Fenix Flashlights FX-RTF Red Filter fits most Pxx and Lxx series Fenix LED Flashlights (AD301-R)Fenix Flashlights FX-RTF Red FilterThis is a filter which attaches to Fenix flashlights to convert it's output to red light. Made with a toughened ultra clear glass lens with AR coating and high temperature resistance. The filter seat uses the material PC 2805 from Bayer Material Science AG Compatible with most AA and CR123 Fenix flashlights Manufacturer Part Number: AD301-R PLEASE NOTE: This filter adapter will only work with the following lights in the Fenix Digital series:PD30, PD20, LD20, LD10, P3D, P2D, L1D, L2D, P1D, L1T/L2Tv2.0 (It will not work with first version L1T/L2T)$4FAQ about Fenix L2t
Does anyone had even heard / used Fenix flashlight? I just knew about this brand in a website. nevertheless, i;m very impressed with this brand. most of their flashlight are affordable but emits high intensity light.one of their flashlight which i think i'll buy is L2T. so, what's ur opinion? is this brand is trustable?
-i am ask this bcoz im finding a perfect flashlight for me as i cant afford buying other high quality flashlight such as SureFire or Leupod.
They are great and very affordable. A lot do not like the color of the beam but depending on the model the focus is great (very important).
They are solid, miserly on battery use and bright.
I have used a friends but I did not buy since I already had a SureFire and a couple of different Streamlights.
Bloggers about Fenix L2t
Fenix L2T 2 Level High Performance Cree LED Flashlight Discount..The Fenix L2T V2.0 has a simple yet effective interface with efficient emitter for a brighter, more intense beam. Also uses a textured reflector, eliminating artifacts and dark spots some smooth reflectors can create.
Jaylins Blog Blog Archive Fenix L2T 2 Level High Performance .The Fenix L2T V2.0 has a simple yet effective interface with efficient emitter for a brighter, more intense beam. Also uses a textured reflector, eliminating artifacts and dark spots some smooth reflectors can create.
Fenix L2T 2 Level High Performance Cree LED Flashlight Retail .The Fenix L2T V2.0 has a simple yet effective interface with efficient emitter for a brighter, more intense beam. Also uses a textured reflector, eliminating artifacts and dark spots some smooth reflectors can create.
Fenix E21 or Fenix L2T v2.Hi, I have offer to choose what Fenix LED model shall get. Can someone please tell me what is the difference between these two LED flashlights and why is L2T v2 cost 20 more at my local store and both are 150 lumens + and work on 2 AA
Buy Fenix L2T 2 Level High Performance Cree LED Flashlight At Amazon!.The Fenix L2T V2.0 has a simple yet effective interface with efficient emitter for a brighter, more intense beam. Also uses a textured reflector, eliminating artifacts and dark spots some smooth reflectors can create.
FS: Fenix L2T V2.0 Rebel.Selling an excellent condition Fenix L2T V2.0 Rebel. The light looks like new except for a very tiny nick on the edge of the rear tailcap. This light was never carried and was not used much. It is functioning fine.
FS: Fenix L2T V2.0 Rebel Price Drop .Selling an excellent condition Fenix L2T V2.0 Rebel. The light looks like new except for a very tiny nick on the edge of the rear tailcap. This light was never carried and was not used much. It is functioning fine.
Fenix L2T 2 Level High Performance Cree LED Flashlight Review..The Fenix L2T V2.0 has a simple yet effective interface with efficient emitter for a brighter, more intense beam. Also uses a textured reflector, eliminating artifacts and dark spots some smooth reflectors can create.
Fenix L2t in web
Fenix L2T V2 Cree LED Flashlight Olive: Electronics.The Fenix L2T V2.0 takes the simple, effective interface of the original L2T
Ultra Powerful Fenix L2T Q2 152Lumens LED Flashlight (Black) US .You will not regret to buy this high performance Fenix L2T Q2 152lumens LED flashlight, which is the best selection for lighting use in the dark outside.
EliteLED.com Fenix L2T V2.0 Cree LED Flashlight.fully regulated circuit enables the Fenix L2T V2.0 to maintain near maximum
Fenix L2T V2.0 Flashlight: Sports amp Outdoors.Fenix L2T V2.0 Flashlight. Compact and lightweight without compromising a thing. Never be left in the dark again! Running off just 2 inexpensive quot AA quot
Fenix L2T v2.0 Q2 Black Fenix Store.Com.Fenix L2T v2.0 Q2 Black The #1 source for Fenix flashlights and accessories.
EliteLED.com Fenix L2T LED Flashlight.Fenix L2T Luxeon 3W LED Flashlight 2x AA, 2 Stage Model. Click photos to enlarge. L2T Features: Using a 3 watt 100000 hour T bin Luxeon LED,
Fenix L1T and L2T Flashlight Reviews and LED Modifications.The Fenix L1T and L2T are the adjustable output models of the Fenix L1 and L2 series. The L1T/L2T use a 3 watt Luxeon LED for illumination, are powered with
Fenix L2T Body.Fenix L2T body. Converts Fenix L1T to L2T powered by 2 ea AA batteries. Batteries NOT included.
Fenix L2t is from category: Flashlights.
Photos of Fenix L2t
You may also like
Fenix L2t videos
3 watt led torch review Review for an ultra cheap flashlight / torch.
2011/04/15 OFFROAD OFFROAD C Fenix L2T Baoch 8W
Fenix LD01 Review Light Up Your EDC! A review of the Fenix LD01 flashlight. This is my new EDC flashlight. It takes 1 AAA battery and spits out 9 lumens on low, 28 lumens on medium, and 85 lumens on high. The light weight of 0.5oz without a battery. The solid construction of the aluminum body with a type 3 anodize should holdup well over time. This is a high quality flashlight at about 35 at the time I acquired it. I highly recommend Fenix flashlights as they are a good value when compared to other high end offerings of the same type.